Each ZipWall® SLP6 package contains six 12’ aluminum Spring Loaded poles (SLPs), and accessories. Use them to create a temporary dust barrier of any length in minutes without the use of tape, staples or ladders. That saves time and costly repairs to painted surfaces and will increase customer satisfaction. Consider this example: A 50 foot long 11 foot high barrier takes about 2 hours to build using conventional methods. With the ZipWall® system, the same barrier can be completed by one person in under 10 minutes.
The ZipWall® Dust Barrier System is patented and has many advantages over conventional methods. The twist-locking pole lets you raise the sheeting without a ladder. The non-skid, non-marking material at the top grabs the ceiling, while the non-skid GripDisk under the foot keeps the pole locked in position at the floor. Spring Loading lets you lift the pole to tuck the sheeting underneath for easy setup. It also maintains constant tension on the barrier, to compensate for movement at the ceiling or at the floor if the poles are bumped, or if there is a lot of air movement.
All ZipWall poles are ideal for dropped ceilings. Spring Loading automatically adjusts the pole height to compensate for any movement of the grid during setup. Just place the poles so the tops push against the grid, then follow the grid until you’ve contained the area.
SLP poles extend from 4 feet 7 inches to 12 feet. They are clear anodized aluminum and weigh just 1.5lbs each. Poles should be placed every 8' to 10' or closer if there is a lot of air movement. A GripDisk under each pole secures the pole on smooth flooring like vinyl or wood. SLP poles can accept any plastic or cloth sheeting up to 8 mils thick and can support up to 110 lbs. These poles work with all ZipWall accessories including: Foam Rails, Side Clamps and self adhesive zippers and more. Zipwall SLP Dust Barrier System is an excellent labor saver for commercial drywall, painting or general contractors when job area cleanliness is essential.